空气中^131I的取样和测量方法的研究

本文介绍一种气态和气载~(131)I 取样器。着重介绍了一种指数分布源的效率刻度方法,讨论了与取样有关的一些问题。     

Computer modeling of the continuous annealing furnace

A computer program to calculate the strip temperature heated in the continuous annealing furnace was developed, using the zone method for radiative heat transfer analysis with the measured gas temperature in the furnace. Using theF _E Operator, the present study considered the effects of soot and transient species, in addition to the H₂O−CO₂ gas mixture on the gas radiative heat transfer. The predicted strip temperature distribution forF _E=1.05 represented well the measured data. The maximum difference in the heat flux transfered to the strip from the combustion gas forF _E=1.0 (without soot and transient species gas radiation) and 1.05 (with soot and transient species gas radiation) was about 15%. The present study also investigated the effects of line speed and thickness variations on the strip temperature, establishing the bases for the on-line computer model.     

Double melting behavior of cyclic tris(ethylene terephthalate)

Summary Cyclic tris(ethylene terephthalate) (CTET) was separated from oligomeric extract of poly(ethylene terephthalate) by the conventional solvent separation method. The structure of CTET was characterized by differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy. It is shown that the double melting behavior of meltcrystallized CTET is attributed to the morphological change created by heat-treatment. The effect of the morphological change on the crystal structure of CTET was also examined.     

Crystalline and viscoelastic properties of branched polyethylenes synthesized using bidentate nickel (II) catalyst

In this work, five branched polyethylenes with different branching units were synthesized using bidentate nickel (II) catalyst containing -diimine ligands. For comparison, one linear polyethylene was also prepared using tridentate iron (II) catalyst containing -diimine ligand. The crystalline structure of the polyethylenes was investigated using X-ray diffraction (XRD) and polarized optical microscope. The crystalline properties were also measured by differential scanning calorimeter (DSC). Viscoelastic properties of the polyethylenes were investigated using rheometric dynamic analyzer. The DSC and XRD results showed that highly branched polyethylenes exhibit no melting points and no predominating crystalline forms, while the linear polyethylene exhibits clear orthorhombic (110) and (200) reflections on XRD pattern and a clear melting point at 118 °C. The viscoelastic properties of the branched polyethylenes were very complicated due to the combined effect of the molecular weight difference and the degree of chain branching as well as the branching structure.     

Antioxidant activity of anacardic acids

Anacardic acids, 6-pentadec(en)ylsalicylic acids isolated from the cashew Anacardium occidentale L. (Anacardiaceae) nut and apple, were found to possess preventive antioxidant activity while salicylic acid did not show this activity. These anacardic acids prevent generation of superoxide radicals by inhibiting xanthine oxidase (EC 1.1.3.22, Grade IV) without radical-scavenging activity. Notably, the inhibition kinetics of anacardic acids do not follow hyperbolic dependence of enzyme inhibition on inhibitor contents (Michaelis–Menten equation) but follow the Hill equation instead. Anacardic acid (C_15:1) inhibited the soybean lipoxygenase-1 (EC 1.13.11.12, Type 1) catalyzed oxidation of linoleic acid with an IC₅₀ of 6.8 μM. The inhibition is a slow and reversible reaction without residual enzyme activity. The inhibition kinetics indicate that anacardic acid (C_15:1) is a competitive inhibitor and the inhibition constant, K_I, was 2.8 μM. Anacardic acids act as antioxidants in a variety ways, including inhibition of various prooxidant enzymes involved in the production of the reactive oxygen species and chelate divalent metal ions such as Fe²⁺ or Cu²⁺, but do not quench reactive oxygen species. The C₁₅-alkenyl side chain is largely associated with the activity.     

A localized surface plasmon resonance based immunosensor for the detection of casein in milk

In this research, a localized surface plasmon resonance (LSPR) immunosensor based on gold-capped nanoparticle substrate for detecting casein, one of the most potent allergens in milk, was developed. The fabrication of the gold-capped nanoparticle substrate involved a surface-modified silica nanoparticle layer (core) on the slide glass substrate between bottom and top gold layers (shell). The absorbance peak of the gold-capped nanoparticle substrate was observed at ∼520 nm. In addition, the atomic force microscopy (AFM) images demonstrated that the nanoparticles formed a monolayer on the slide glass. After immobilizing anti-casein antibody on the surface, our device, casein immunosensor, could be applied easily for the detection of casein in the raw milk sample without a difficult pretreatment. Under the optimum conditions, the detection limit of the casein immunosensor was determined as 10 ng/mL. Our device brings several advantages to the existing LSPR-based biosensors with its easy fabrication, simple handling, low-cost, and high sensitivity.     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

Long-wavelength GaInNAs(Sb) lasers on GaAs

The boom in fiber-optic communications has caused a high demand for GaAs-based lasers in the 1.3-1.6-μm range. This has led to the introduction of small amounts of nitrogen into InGaAs to reduce the bandgap sufficiently, resulting in a new material that is lattice matched to GaAs. More recently, the addition of Sb has allowed further reduction of the bandgap, leading to the first demonstration of 1.5-μm GaAs-based lasers by the authors. Additional work has focused on the use of GaAs, GaNAs, and now GaNAsSb barriers as cladding for GaInNAsSb quantum wells. We present the results of photoluminescence, as well as in-plane lasers studies, made with these combinations of materials. With GaNAs or GaNAsSb barriers, the blue shift due to post-growth annealing is suppressed, and longer wavelength laser emission is achieved. Long wavelength luminescence out to 1.6 μm from GaInNAsSb quantum wells, with GaNAsSb barriers, was observed. In-plane lasers from these samples yielded lasers operating out to 1.49 μm, a minimum threshold current density of 500 A/cm² per quantum well, a maximum differential quantum efficiency of 75%, and pulsed power up to 350 mW at room temperature     

Depression in the quantity of intestinal secretory IgA and in the expression of the polymeric immunoglobulin receptor in caloric deficiency of the weanling mouse

Splenomegaly is uncommon in myelodysplasia (MDS) and, although cytopenias may be severe, therapeutic splenectomy is rarely performed. We report the histologic, histochemical, and immunophenotypic findings of nine cases of surgical splenectomy and four postmortem spleens from MDS patients. Four histologic patterns were identified: one dominated by erythrophagocytosis, one characterized by red pulp plasmacytosis, one with extramedullary hematopoiesis as the only salient finding, and one with marked red pulp expansion caused by a monocytic proliferation. Wright-Giemsa and histochemical stains were performed on touch preparations in three cases and played a critical role in the precise subclassification of one MDS patient's hematologic disorder, which ultimately proved to be chronic myelomonocytic leukemia. Splenectomy led to sustained improvement of cytopenias in three cases, but did not eliminate transfusion dependence for the remaining patients. Three splenectomy cases exhibited clustered Leder-negative mononuclear elements: two of these patients experienced disease progression to refractory anemia with excess blasts in transformation or acute myelogenous leukemia during post-splenectomy follow-up, whereas none of the three splenectomy patients without clustered mononuclear elements did. We conclude that splenomegaly in MDS usually reflects the sequelae of dyspoiesis rather than evidence of a proliferative phase, that clustering of Leder-negative large cells may correlate with either a substantial monocytic component or, possibly, increased risk of disease progression, and that the spleen can provide diagnostic as well as prognostic information in MDS patients with splenomegaly.